From Scarce to An Uravu: Extracting Potable Water From The Air!

- Advertisement -

As the world sees drinking water sources become scarce amid unprecedented climate changes, Bengaluru-based startup Uravu Labs creates water out of thin air through renewable energy sources. EFY’s Yashasvini Razdan spoke to Swapnil Shrivastav to learn more about this brilliant innovation…

Star Wars legend Luke Skywalker’s hot desert planet, Tatooine, had a moisture farm that used “vaporators” to pull drinking water from the air. For a long time, vaporators had remained a figment of science fiction until two NIT Calicut graduates faced water rationing in college after the waterbody which supplied water to their campus dried up.

Propelled by a looming water crisis, Swapnil Shrivastav and Venkatesh R decided to turn fiction into reality in 2016. They didn’t realise that six years later, they would have managed to achieve it with Uravu Labs. Uravu means a spring of water in Malayalam.

- Advertisement -

In 2017-18, the duo was joined by Govinda Balaji and Pardeep Garg. Together, the futuristic four designed a device to capture water from the air using a hygroscopic substance called a desiccant with a saltwater solution called brine. The air is passed over the brine, which absorbs the moisture, which, in turn, saturates the solution. The brine is then heated with solar energy to evaporate the water, and the resulting water vapour is collected.

The machine is equipped with various sensors to monitor five main parameters. “We monitor the relative humidity of the ambient air inside the device before condensation and the temperature of the air and of the water being formed. Flow rates are also measured at different points, including air and water flow rates. To keep track of the overall performance, we also have a sensor to measure the amount of water produced by the system. Lastly, we ensure water quality by monitoring pH and total dissolved solids (TDS) levels in the water output,” elaborates Shrivastav.

Initially, the data from these sensors was gathered using a Raspberry Pi and visualised through an AWS-based dashboard for analysis. As the startup progressed towards an industrial-grade setup in 2021-22, they transitioned to using programmable logic controllers (PLCs) for control and data acquisition.

“The innovation in our electronics side is centred around real-time problem solving. We need to know the exact conditions, such as humidity levels, water production, etc., in real time. This demands a lot of decision-making and analysis on the board level, and the robust electronics hardware gives us more control and real-time responsiveness in our water capture devices,” explains Shrivastav.

Uravu water factory
Uravu water factory

The company’s initial prototype utilised silica gel and had mirrors to focus solar energy and heat on the silica gel to produce water. The self-contained unit could produce about 5 litres of water a day. Each unit required dedicated components like fans, valves, and pumps, which affected the cost while scaling.

To optimise the size and scale of production, the startup switched to a liquid desiccant—calcium chloride solution. The desiccant is sprinkled through a mesh in the absorber units to increase the surface area as a fan draws air. After it absorbs moisture from the air, the desiccant is pumped to a separate desorber unit where the solution is heated to 65 to 70 degrees celsius by a coiled pipe filled with hot water. The hot and humid air is passed to a low-power, air-cooled condenser. Each absorber unit can collect as much as 200 litres per day. While the output of traditional condensing systems can vary considerably depending on the local humidity, Uravu’s device can achieve the same output in drier areas by simply loading more desiccant into the absorber.

The co-founders (L-R): Govinda Balaji (Engineering), Swapnil Shrivastav (Business), Pardeep Garg (Technology & Business), Venkatesh R (Design & Operations)
The co-founders (L-R): Govinda Balaji (Engineering), Swapnil Shrivastav (Business), Pardeep Garg (Technology & Business), Venkatesh R (Design & Operations)

The company has coupled six absorbers with two desorber units to create Uravu’s 1,000-litre-per-day machine. The latest upgrade to Uravu’s design can be coupled with different heat sources, including solar thermal panels, biomass burners, and industrial waste heat.

Based in Bengaluru, the startup’s lone design and assembly unit has a total in-house capacity of 3,000 litres per day, out of which currently, 1,800 litres are being utilised daily for customers in the hospitality industry.

It is eyeing the production of other beverage products at the plant, such as tonic water, ginger ale, and flavoured water, by setting up an assembly line for the water produced across different pH ranges.

It has partnered with several manufacturers and vendors based in Bengaluru and Coimbatore to supply customised components to build the product. The startup is looking to expand its operations from 2025 to other metro cities in the country and is ambitiously targeting a foreign location in Europe or the Middle East.

- Advertisement -

Most Popular Articles

Yashasvini Razdan
Yashasvini Razdan
Yashasvini Razdan is a journalist at EFY. She has the rare ability to write both on tech and business aspects of electronics, thanks to an insatiable thirst to know all about technology. Driven by curiosity, she collects hard facts and wields the power of her pen to simplify and disseminate information.

LEAVE A REPLY

Please enter your comment!
Please enter your name here
Captcha verification failed!
CAPTCHA user score failed. Please contact us!

Exclusive

Breathing Through “First-Time Silicon Success”

0
No one is born a leader, but the choices we make in life propel us to become a leader. For Chitra Hariharan, an innocent...

Worldwide Chip Sales Increased By 1.1% In April, Marking First 2024 Growth

0
A new forecast predicts robust annual growth, and the semiconductor market shows strong momentum, especially in the Americas and China. The Semiconductor Industry Association (SIA)...

5G Chipset Market to Hit $92.09B by 2030

0
Reports indicate that the global next-gen wireless processor market is on track to surpass the $100 billion mark in the coming decade. The 5G chipset...

Buzz

Gruner Bags 11 CBG Plants Order From Reliance

0
The Noida-based CBG plant manufacturer is set to build a large facility in Gujarat in association with Reliance Industries, expects a vast turnover with...

Tesla Sues Former Supplier For EV Battery Secrets Theft

0
According to the lawsuit, Matthews, located in Pittsburgh, started providing manufacturing equipment to Tesla in 2019. Tesla disclosed to Matthews proprietary information about dry-electrode...

Ola Electric Launches 4680 Battery Cells Production

0
Ola Electric launches its in-house designed 4680 battery cells, testing them in two-wheelers, and prepares to produce 10,000 cells daily in Tamil Nadu by...

Important Sectors

Gruner Bags 11 CBG Plants Order From Reliance

0
The Noida-based CBG plant manufacturer is set to build a large facility in Gujarat in association with Reliance Industries, expects a vast turnover with...

Tesla Sues Former Supplier For EV Battery Secrets Theft

0
According to the lawsuit, Matthews, located in Pittsburgh, started providing manufacturing equipment to Tesla in 2019. Tesla disclosed to Matthews proprietary information about dry-electrode...

Ola Electric Launches 4680 Battery Cells Production

0
Ola Electric launches its in-house designed 4680 battery cells, testing them in two-wheelers, and prepares to produce 10,000 cells daily in Tamil Nadu by...

Sundram Fasteners Wins ₹4,000 Crore In EV Orders, Eyes Expansion

0
Plans to increase the revenue share from non-automotive segments in the upcoming years. Sundram Fasteners Ltd, a prominent manufacturer of auto parts, is seeing substantial...

MHI Proposes ₹12,600-30,000 Crore For EV Adoption

0
MHI has put forth a significant proposal ranging from ₹12,600 to 30,000 crore under the FAME-III scheme, to accelerate the adoption of Electric Vehicles...

Manufacturing

Honeywell Creates AI Software For Gigafactory Efficiency

0
Honeywell anticipates that its new battery manufacturing excellence platform will lower the costs of cell production, speed up the ramp-up cycles, and decrease material...

Raju B Ketkale Named CEO Of Lumax Industries

0
He takes over from Vishnu Johri, who is stepping down for personal reasons. Lumax Industries Limited, a Tier-1 automotive lighting system and component manufacturer within...

Schaeffler And Symbio JV Innoplate Starts Fuel Cell Plate Production

0
Starting with an initial production capacity of 4 million bipolar plates, the Innoplate joint venture is projected to achieve an annual output of 50...

Tesla Pushes Suppliers To Source Parts Beyond Taiwan And China

0
China and Taiwan are major global producers of essential electronics parts and components. Tesla has requested that its suppliers move the production of components and...

Uno Minda Shines With Increased Content Per Car And EV Focus

0
Uno Minda, a key player in the auto parts industry, has demonstrated significant revenue growth, surpassing industry averages by more than double over the...