Union Budget: Saptarishi For The Electronics Industry Too?

- Advertisement -
- Advertisement -

Key features of Budget 2023-24 announced by Finance Minister Nirmala Sitharaman on
1st February this year are highlighted below, along with the reactions from the industry

The Union Minister for Finance and Corporate Affairs, Nirmala Sitharaman, on way to Rashtrapati Bhavan and Parliament House, along with the Ministers of State for Finance, Pankaj Chaowdhary and Dr Bhagwat Kishanrao Karad, and some senior officials to present the Union Budget 2023-24
The Union Minister for Finance and Corporate Affairs, Smt. Nirmala Sitharaman departs from North Block to Rashtrapati Bhavan and Parliament House, along with the Ministers of State for Finance, Shri Pankaj Chaowdhary and Dr. Bhagwat Kishanrao Karad and the senior officials to present the Union Budget 2023-24, in New Delhi on February 01, 2023.

Presenting the Union Budget this year, when Finance Minister Nirmala Sitharaman announced the adoption of Saptarishi (seven priorities) to guide India through the Amrit Kaal, all of the electronics industry was hoping for a helping hand too. And why not? The electronics and tech markets are still reeling under the Covid-19 pandemic-induced downfall.

Hence, the government’s decision to eliminate import duty on the camera lens and components was taken in good stead, as it will benefit mobile phone manufacturers in India. Electronic Industries Association of India (ELCINA) believes that such exemption should be extended to all other electronic product segments that use camera modules and electronic components.

- Advertisement -

Highlights

But before going into the nitty-gritty of it, let’s come back to square one and look at the major points of the Economic Survey and Union Budget 2023-24, with an eye on the Electronics System Design & Manufacturing (ESDM) sector:

  • Globally, India is the 5th largest economy, and its per capita income has increased by over 2x in the last five years to ₹197,000.
  • The domestic electronics industry, as of FY20, is valued at US$118 billion. India aims to reach US$300 billion worth of electronics manufacturing and US$ 120 billion in exports by FY26.
  • The major drivers of growth in this industry are mobile phones, consumer electronics, and industrial electronics. India has become the second-largest mobile phone manufacturer globally, with the production of handsets going up from 60 million units in FY15 to 310 million units in FY22.
  • ₹350 billion priority capital has been assigned for clean energy transition. The minister announced an outlay of ₹197 billion for the recently launched National Green Hydrogen Mission, with a target of 500MMT (million metric tonnes) of green hydrogen by 2030.
  • Transportation and logistics received a major push with an outlay of ₹2,400 billion for railways and announcements for 50 additional airports, helipads, water aero drones, etc.
The announcement of three Centres of Artificial Intelligence and 100 labs for 5G apps to nurture R&D in India with the vision to Make AI in India and Make AI work for India will further strengthen India’s position vis-à-vis global counterparts, said S. Durgaprasad, Co-founder, Director, and Group CEO of Bahwan CyberTek, a global provider of digital transformation solutions.
  •  Pushing for a reduced digital divide, labs for 5G applications, classrooms, precision farming, and healthcare applications will be set up, and the scope of Digilocker will be expanded.
  • Receiving a significant fillip after the lockdown, phase 3 of E-courts projects is to be launched with an outlay of ₹70 billion.
  • This year, three Centres of Excellence for AI, and other advanced emerging technologies will be set up.
  • The Budget also touched upon the aspect of skill development in Industry 4.0, robotics, drones, and related industries.
  • The government reduced the basic customs duty (BCD) on certain parts, such as camera lenses, while concessional duty will continue on lithium-ion cells for another year.
  • Agriculture Accelerator fund to be set up for encouraging innovative startups to bring affordable rural ideas to fruition.
As per Jyoti Pal, Associate Partner at Lakshmikumaran & Sridharan, “Some changes have been made in Tariff Heading 8524 of the Customs Tariff Act. Separate tariff items have been added for flat panel display modules for certain categories of ADPM (Computers), mobile phones, television sets/ LCDs, and residual categories for others. Tariff Heading 8517 has also been amended.”
Table 1
CUSTOM DUTY ANNOUNCEMENTS FOR ESDM SECTOR
Item Exist.
BCD (%)
Updated BCD (%) Notif./Finance
Bill Clause
Camera lens for camera module and Input/sub parts for lens of camera module (mobile phone) 2.5 Nil Notification No. 6/2023, Serial No. 3
Parts for manufacture of open cells of TV panels 5 Nil Notification No. 2/2023, Serial No. 33
Capital goods and machinery required for manufacture of lithium-ion cells for batteries used in electric vehicles 7.5 Nil Notification No. 6/2023, Serial No. 2
Palladium Tetra Amine Sulphate for manufacture of parts of connectors 7.5 Nil Notification No. 6/2023, Serial No. 1
Specified chemicals/items for manufacture of Pre-calcined Ferrite Powder 7.5 Nil Notification No. 6/2023, Serial No. 17

Changes to be noted

  • Substitution/Amendment in Tariff Heading 8517–Information Technology Agreement, 1996–motivated in Supporting Manufacturing of Electronics.
  • Expansion in the scope of Tariff Heading 8524: Separate tariff items have been added for flat panel display modules for certain categories of ADPM, mobile phones, television sets/LCDs, and residual categories for others.
  • The scope of exemption expanded to include capital goods used for manufacturing the batteries for electrically operated vehicles.
  • Reduction in the customs duty rate on components used in the manufacture of open cell of TV panels.
  • Reduction in effective customs duty on the camera lens and sub-parts/inputs used in the manufacture of mobile phone camera modules.

Positive steps

The industry associations have welcomed the following steps announced in the Budget:

  1. Removal of duty of camera lens of 2.75%
  2.  Removal of duty on inputs to parts of connectors—palladium tetra amine sulphate
  3. Reduction of BCD on parts of the open cell of the TV panel from 5.5% to 2.75% (including SWS)
  4. Continuation of customs exemption notifications, which were facing the sunset on the 31st of March 2023, for another year
  5. Customs duty exemption for the import of machinery required for the manufacture of lithium-ion cells for batteries used in EVs
  6. Reduction of BCD on specific parts used in the manufacturing of television sets to 2.5%
  7. Reclassification in HS Codes 8517 and 8524 for flat panel display inputs
  8. Relief on customs duty on import of certain parts used in the manufacturing of mobile phones
  9. Rectification of inverted duty structure to encourage manufacturing of electric kitchen chimneys
Pratik Kamdar, Co-founder of Neuron Energy, a player in the battery industry remarked: “The Customs Duty exemption on capital goods and machinery to manufacture lithium-ion will be a facilitator for the country to transition to sustainable and eco-friendly mobility. The exemption will have a domino effect on the overall sector with the over substantial decrease in the overall cost of the finished products, wherein the battery packs are likely to reduce by 5% coupled with lower initial investments. Additionally, the vehicle scrapping policy will also be beneficial if the old vehicles are replaced by electric vehicles. This will further aid in the country’s vision of mass EV adoption by 2030.”

Gaps

Notwithstanding the beneficial steps announced on February 1, the Budget left many long-standing demands unfulfilled, despite repeated requests put up by industry bodies and individual companies.

According to the Chairman of India Cellular & Electronics Association, Pankaj Mohindroo, “A high-performing sector’s genuine requests have not been addressed. These could have provided a significant impact on competitiveness leading to better exports, arresting the grey market and boosting revenue.” He pointed out the below-mentioned issues:

  1. Capping of BCD on import of high-end mobile phones could have arrested the burgeoning smuggled market, which has crossed ₹120 billion, in 2023. This measure would have boosted government revenue, reduced smuggling, ensured fair trade, and helped build legal businesses in India.
  2. Removal of input duties on Resin, Mesh, Sponge, Film, Gasket, Logo, Cover Tape, and Adhesive Tape from 8.25% – 16.5% to zero level was essential to promote the manufacturing of a very critical vertical—Mechanics. But the Budget didn’t provide the needed relief in this direction.
  3. Input duties of 2.75%, the duty imposed in the previous Budget on the many inputs of PCBA, inputs of connector, and inputs of camera module were not removed.
  4. Removal of duty on certain parts of the chargers would have provided the huge charger manufacturing industry with a competitive edge.
  5. The 50% increase in GST from 12% to 18% has dealt a very cruel hand to this high-performing industry, which kept the nation’s economy moving during the Covid pandemic.
The Secretary General at ELCINA, Rajoo Goel, noted the Finance Minister’s announcement to reduce customs duty on parts of open cell of TV panels to 2.5% from 5% earlier. “All this will create demand for electronics hardware and create jobs as well in the electronics industry. The Finance Minister has laid a lot of emphasis on skill development for green energy products, drones, robotics, and IoT. All these are positive developments for the electronics sector,” commented Goel.

ICEA opined that while the industry had met the 2021-22 manufacturing target of ₹2,750 billion, we will fall short of the manufacturing target of FY 2022-23 because of domestic demand shrinking in 2022-23. Mohindroo added that, competitiveness is the key to both buoyant domestic demand and export.

Table 2
8524: FLAT PANEL DISPLAY MODULES, WHETHER OR NOT INCORPORATING
TOUCH-SENSITIVE SCREENS
S. No. Previous HSC Description Revised HS Lines (Finance Bill 2023) Description
1 8524 11 00 Of Liquid Crystal 8524 11 10 For the goods of sub-heading 8471 30 or 8471 41
8524 11 20 For the goods of sub-heading 8517 13 or 8517 14
8524 11 30 For the goods of sub-heading 8528 72 or 8528 73
8524 11 90 Other
2 8524 12 00 Of organic light-emitting diodes (OLED) 8524 12 10 For the goods of sub-heading 8471 30 or 8471 41
8524 12 20 For the goods of sub-heading 8517 13 or 8517 14
8524 12 30 For the goods of sub-heading 8528 72 or 8528 73
8524 12 90 Other
3 8524 19 00 Other 8524 19 10 For the goods of sub-heading 8471 30 or 8471 41
8524 19 20 For the goods of sub-heading 8517 13 or 8517 14
8524 19 30 For the goods of sub-heading 8528 72 or 8528 73
8524 19 90 Other
4 8524 91 00 Of liquid crystals 8524 91 10 For the goods of sub-heading 8471 30 or 8471 41
8524 91 20 For the goods of sub-heading 8517 13 or 8517 14
8524 91 30 For the goods of sub-heading 8528 72 or 8528 73
8524 91 90 Other
5 8524 92 00 Of organic light-emitting diodes (OLED) 8524 92 10 For the goods of sub-heading 8471 30 or 8471 41
8524 92 20 For the goods of sub-heading 8517 13 or 8517 14
8524 92 30 For the goods of sub-heading 8528 72 or 8528 73
8524 92 90 Other
6 8524 99 00 Other 8524 99 10 For the goods of sub-heading 8471 30 or 8471 41
8524 99 20 For the goods of sub-heading 8517 13 or 8517 14
8524 99 30 For the goods of sub-heading 8528 72 or 8528 73
8524 99 90 Other

In a post-Budget session conducted by ELCINA, long-term and enhanced support for components manufacturing under PLI and the Scheme for Promotion of Manufacturing of Electronic Components and Semiconductors (SPECS) was recommended. The association also stated that the EMS sector must be included under the SPECS scheme to provide subsidies against capital investments, as it will hopefully give the required thrust to value addition and boost electronics manufacturing in all segments.

Some industry players suggested bringing Service Linked Incentive Schemes, on the lines of Production Linked Incentive (PLI) Schemes, to improve the workflow. Going forward, deeper digital and Internet of Things (IoT) penetration and the ever-increasing impetus on smart cities and robotics will boost the industrial and automated electronics sector in Industry 4.0. Also, the PLI scheme is expected to assist more domestic players to achieve economies of scale in production through localising. In turn, it will magnify India’s role in the global value chain and enhance export competitiveness. What remains to be seen, though, is the effective implementation of the initiatives announced for India’s Amrit Kaal.


Vaishali Yadav, a journalist at EFY, muses upon clouds, security, sustainability, integration, smartness, machines and learning—both trivially and technologically

- Advertisement -

Related Artcles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Exclusive

Indian PC Market Grows 4% In Q4 2023, Local Manufacturing Efforts Ramp Up

0
IT procurement by enterprises and SMBs, delayed in the first half of 2023, is starting to take place and is expected to accelerate...

“Efficiency In Solar Energy Is More About Investment Rationale Than Resource Limitation”

0
Indian utility-scale solar company SolarArise claims to offer investors long-term, cash-generating assets and anticipates advancements in energy storage technologies to enable 24-hour clean power...

A New Form Factor Of Two Wheelers Takes Shape In India

0
The logistics sector has become India's biggest adopter of electric vehicles. However, attrition due to physical and mental fatigue is alarming for lease and...

Buzz

Suzuki Makes Investment In IoT Expert Soracom

0
Key areas of interest include globally-marketed electric vehicles, modular 'mobility base units', and innovative technologies and services to achieve carbon neutrality. Just a month after...

Microsoft announces Pavan Davuluri As Head of Windows and Surface

0
Davuluri has been contributing to the company's collaborations with Qualcomm and AMD in developing custom Surface processors. Microsoft has announced the appointment of Pavan Davuluri...

EDAG, Baier Motors Develop Electric Motorcycle for Africa

0
The Oryx Concept motorcycle, a collaboration between EDAG Group and start-up Baier Motors, is designed to meet the increasing demand in Africa for a...

Important Sectors

Suzuki Makes Investment In IoT Expert Soracom

0
Key areas of interest include globally-marketed electric vehicles, modular 'mobility base units', and innovative technologies and services to achieve carbon neutrality. Just a month after...

EDAG, Baier Motors Develop Electric Motorcycle for Africa

0
The Oryx Concept motorcycle, a collaboration between EDAG Group and start-up Baier Motors, is designed to meet the increasing demand in Africa for a...

MNRE Announces Minimum Efficiency Criteria For Thin Film Solar

0
Utility grid- scale power plants using CdTe should have efficiency of 19%.  For rooftop and solar pumping applications efficiency requirement is 18.5% and...

BYD Achieves 7 Million New Energy Vehicles, Last Million In 4 Months

0
BYD has become the first in the world to produce seven million new energy vehicles (NEVs), with the most recent million being manufactured in...

ZF Hits 1,000 CeTrax Lite Electric CV Drives, Boosted by Isuzu Demand

0
Shortly after beginning volume production, Isuzu experienced an increase in demand, driven by its use of the ZF CeTrax lite electric drive in its...

Manufacturing

JLR To Hire 250 Electrical Technicians For Future EVs

0
These new roles, part of a £15 billion investment, are in addition to 300 positions created last year by the British car maker. Jaguar Land...

Altmin India Partners With WMG To Advance Battery Tech

0
Altmin and WMG will collaborate to strengthen their global battery materials supply chain position by optimizing cathode materials and developing diverse cell designs across...

EVs To Cost Less Than Gas Vehicles by 2027, Says Gartner

0
Gartner predicts a faster decline in production costs compared to battery costs, which represent the most significant expense in an electric vehicle, accounting for...
MG

MG Motor To Set Up Battery Assembly Unit At Halol Facility

0
The company plans to investigate battery cell production in collaboration with external partners. Automaker MG Motor India is actively exploring the possibility of assembling and...

Servotech Boosts India’s EV Charging Infrastructure With Manufacturing Facility

0
The new facility is poised to start with an annual production capacity of 24,000 power modules and plan to scale up to 2.4 lakh...