JARAS 1014 introduced to enable M2M co-operation in SMT lines

The SMT equipment communication rule standardization subcommittee (hereafter referred to as ELS) from the Japan Robot Association (hereafter referred to as JARA), of which Fuji Corporation is a member, has advanced the standardization of communication for M2M cooperation in...

The latest in wave soldering machines

The competition is stiff in the electronics manufacturing industry. Hence, wave soldering machines that are efficient and offer top-notch quality with good pricing, are in demand. By Baishakhi Dutta State-of-art facilities and a strong manufacturing strategy are essential for industry players...

The latest reflow ovens available in the market

The surface mounting of electronic components on a PCB comprises a number of steps. One of them includes reflow soldering, where the components are temporarily attached to their contact pads, and then mounted permanently on the board using controlled...

What’s new in dispensing, coating and curing equipment?

Greater demand in manufacturing and the arrival of Industry 4.0 have encouraged vendors to come up with selective conformal coating and dispensing equipment. By Sneha Ambastha Many new suppliers of dispensing and conformal coating equipment have entered the Indian market in...

Control contamination by using the right ESD and clean room products

Electrostatic discharge (ESD) control is mandated in all manufacturing processes due to its adverse effects on electronic components and products. To meet the growing industry needs, there are now many products and solutions that keep ESD in check. By Baishakhi...

What’s new in software used for electronics manufacturing equipment?

The emergence of Industry 4.0 has increased the demand for smart, single software platforms that make electronics manufacturing equipment work better. By Sneha Ambastha We are all aware that electronics and software are inseparable in today’s world. The story with electronics...

What’s new in solder paste inspection systems?

3D solder paste inspection systems have made the inspection process more accurate and precise, minimising the warping of the PCB. By Sneha Ambastha The miniaturisation of components and the complexity of circuit boards are increasing the importance of solder paste inspection....

What’s new in stencil and screen printer systems?

Highly efficient, compact printers with the automatic stencil cleaning option are the latest trend in the market. These new stencil and screen printers have technical specifications that make them more precise, reliable and suitable for various applications in the...

What’s new in selective soldering systems?

Soldering nozzles and flux applicators play an important role in selective soldering, and the technological advancements in these products have resulted in higher productivity. By Sneha Ambastha Selective soldering is a process in which specific components are soldered to printed circuit...

The latest in wave soldering systems

Various quality issues and the increased requirement for surface mount technology (SMT) component assembly work is forcing manufacturers to move away from the wave soldering technique. Wave soldering is not used widely these days. However, the recent introduction of machinery...

Pick-and-place machines for LED manufacturing

As the demand for LEDs increases across the country, manufacturers are seeking the best pick-and-place machines available The market for LEDs in the country is growing at a brisk pace and this has led to many manufacturers targeting this segment....

The latest reflow ovens available in the market

Large reflow ovens with many heating zones as well as with the lead-free soldering capability are available today. But, are these what buyers need? By Sneha Ambastha A reflow oven, the system for soldering SMD components to the printed circuit board...

Low to medium volume pick-and-place machines focus on flexibility and accuracy

The latest low to medium volume pick-and-place machines are more accurate, flexible and automated, owing to the continually evolving requirements of the customers. By Sneha Ambastha Low to medium volume pick-and-place machines are an industry requirement, as these are used for...

High volume pick-and-place machines are getting smaller

The latest pick-and-place machines have smaller footprints, better accuracy and higher output. By Sneha Ambastha Pick-and-place machines play a very vital role in the assembly of printed circuit boards (PCB). And in the case of high-volume pick-and-place machines, accuracy is of...

Follow Us

7,611FansLike
5,600FollowersFollow
17,530SubscribersSubscribe

Recent Posts

Dell EMC Expects Smart City Projects To Drive Growth In India

Dell EMC expects smart city projects to drive significant growth through activities in internet of things (IoT) in India. Experts of Dell EMC is of...

Bhel Trichy Adds E-Mobility To Its Business Portfolio

Bhel would aggressively focus on revamping its infrastructure and operations to produce e-mobility products. TNN in a recent report stated that Bhel Trichy has added...

GAIL Seeks To Invest In Solar Power Plants And Battery Charging Stations

GAIL wants to invest in start-ups in core business areas and non-core areas either directly or indirectly. State-owned GAIL India has sought shareholder nod to amend...

Matrix Awarded The Prestigious India SME 100 Award 2018

Matrix has been declared as one of India’s Top 100 SMEs. Matrix underwent the stringent evaluation criteria laid down by the India SME Forum Jury...

India PC Market Registers Yearly Growth Driven by Strong Notebook Demand in 2018 Q2

India's traditional PC market shipments posted a 28.1 percent growth year-on-year with shipments totalling 2.25 million units in 2018Q2, according to IDC India’s Quarterly Personal Computing...
Copy Protected by Chetan's WP-Copyprotect.