UPS for offices: Smart choices for smart buyers

- Advertisement -
- Advertisement -

All offices need backup devices. A power cut can mean hours of downtime, productivity loss and critical data loss from servers and desktops, if there is no appropriate backup system. All critical equipment in an office, which need to be in continuous operation and demand high level of data integrity and availability, require uninterrupted power supply. Since utility power is not dependable, UPS is the only solution. An UPS can backup critical loads like servers and PCs in a transfer time of less than 20 minutes and thus, prevent this loss. Besides this application, there are UPS’ which are used for providing power redundancy in critical network infrastructures.

By Srabani Sen

Wednesday, January 20, 2010: Types of UPS required

- Advertisement -

According to Venkat Rao, country manager, medium and large UPS systems, Emerson Network Power (India) Pvt Ltd, there are three standard technologies available in static UPS—offline, line interactive and online. Offline UPS systems—are the least expensive of the three—switches from utility to battery power only when the utility fails. Its usage has been reduced in offices but it is suitable for users looking for simple protection such as domestic use, in the range of sub 3 kVA.

Line interactive systems are similar to offline systems, the only differentiator is that they provide constant monitoring of the integrity of utility power and correct voltage when input voltage fluctuates within certain band. This technology is available in sub 20 kVA range and gives slightly better protection than offline system. It is more suitable for the SOHO segment.

“Line interactive UPS uses a separate charger circuit to charge the battery and goes into inverter mode only when the mains are off. The main advantage of this design is that the inverter/converter unit is always connected to the output, powering the equipment. The design allows for a faster response to a power failure than a standby UPS. The inverter/converter is also normally fitted with circuitry to filter out noise and spikes, and to regulate the power output,” explains Gaurav Burman, director, transaction business, American Power Conversion (APC).

Online UPS, also known as double conversion system, are expensive owing to their complex design and functionalities. These units are available in 3 kVA range. “In this system, all power components are continuously online, hence the name. As incoming power is converted twice, during rectification stage input disturbances get eliminated, and load experiences clean and regulate voltage generated by the inverter. These are used for all mission critical business applications in all verticals,” says Rao

Online UPS use double conversion technology to convert AC power to DC power and back to AC. Here, the primary power sources are batteries of the UPS and the utility power is considered as secondary power source. “Simply put, the load connected to the online UPS always runs on batteries regardless of whether there’s a power failure or not. Due to this, there is zero switchover time when a power failure occurs. Power is directly passed through its inverter and the UPS uses a small part of this power to recharge its batteries and conditions the rest of the power to deliver a nearly ideal output,” states Burman.

Since online UPS are expensive, they are used for high power consuming and critical loads like servers. “While small offices go for line interactive UPS, big corporate offices always go for online UPS,” says Arun Ghosh, MD, Hita Technology. “Typically, 3 kVA to 20 kVA are used in small and medium offices and 10 kVA to 120 kVA in large offices,” adds Ghosh.

What’s the latest

Delta Energy Systems has introduced a new range of 1 kVA to 3 kVA UPS system called E–Series, which is suitable for small and medium enterprises and corporate segments. E-Series has microprocessor controlled, high frequency PWM technology, based on ‘true online’ double conversion UPS system with IGBTs at the inverter stage. “It provides pure sine wave output with high reliability and efficiency. It also has input power factor correction resulting in lower electricity bills and minimised harmonics,” informs Deepak Sharma, country business head, UPS, Delta.

Says Rao, “There is no new topology in the static system as such. However, energy storage devices are witnessing rapid developments in battery, fly wheel, fuel cell and ultra high capacitors.” Emerson has recently introduced high efficiency Nxr UPS, which offers 96 per cent efficiency. Microtek has also introduced E2 energy efficient series of UPS with both internal and external batteries.

Buyers’ requirements

Customers are increasingly looking for higher backup time with the need to be increasingly connected for a longer time. They are also looking for a reliable brands as they cannot risk losing data or facing downtime for a long period. They also look for small sized UPS with high efficiency, power saving and user friendly features. According to Yogesh Dua, director, ups.INVERTER.com, buyers look for a product that comes with excellent service support after sale, advance technology with power saving features, updated software support, noise and pollution free, besides being low cost, small sized and user friendly.

Innovation is the trend

Most innovations that are happening are focused on increasing efficiency. This helps in saving power and the environment as well. Conventionally, UPS in small offices offer efficiency up to 85 per cent. But today, UPS are more sophisticated with LCD display, and clean sine wave output. “These systems offer efficiency as high as 94 per cent in sub 10 kVA range. APC has introduced systems that offer 94 per cent efficiency and KW at 0.9 o/P pf. These systems can offer higher power density and can connect more work stations,” says Rao.

According to Sharma, the trend is moving more and more towards compact systems and rack based solutions to minimise the space required. “As networks are becoming more complex, far flung and being managed from remote control sites, UPS needs to be equipped with multiple network management protocols and flexible enough to incorporate diagnostics and predictive failure analysis,” explains Sharma.

UPS are now coming with higher capacity chargers, add-on chargers and accessories that provide the user the capability to manage, diagnose and optimise medium to large battery bank installations. “The challenges of flexible capacity enhancements and lowest MTTR (mean time to recovery) demands are best addressed by modular and scalable UPS like Delta NH Plus series,” he adds.

Other latest trends are UPS with LCD panels for user friendly information, IGBT with digital signal processing (DSP), modular UPS and UPS with solar charger, etc. “Microtek develops innovated products from time to time. Customers save money by using our products as we use transformers with less core watt loss,” says Sunil Jain, vice president, public relations, Microtek International.

With the advent of laptops, it was feared that power backup devices will become obsolete but that has not happened. All devices need to be charged using either the USB power of laptops or grid power (which means lower battery backup time). Applications have increased in any office and so has the number of servers that run these applications. All these need backup power. New applications like IP telephone require POE switches that power them to be switched on constantly. “These switches cannot afford even the slightest power fluctuations as the whole data may get damaged. The need of these devices to be constantly connected means using high powered routers that continuously connect servers and users. These cannot afford downtime even for a second and, therefore, need huge power backup. Hence, we can say that with the technological advancement of office applications, power backup systems are also getting modified,” says Rao.

The current trend is the usage of online UPS and preference is being given to centralised UPS rather than distributed configurations. Customers expect customised solutions rather than standard UPS. Vendors are expected to integrate UPS with batteries, alternate source like DG sets and static/automatic transfer switch, to provide for complete power protection. According to Ghosh, space and cost are the main issues now, hence offices are going for modular UPS. “Solar powered UPS can also reduce the recurring cost,” he adds.

What majors offer

While Luminous offers centralised and decentralised UPS—an office having 20 computers can buy 20 UPS of 600VA or a single unit of 6 kVA, ups.INVERTER.com offers backup solutions like line interactive, pure sine wave UPS, online UPS and UPS with float-cum-boost chargers. Hita interestingly offers solar and wind hybrid power systems. Microtek, on the other hand, claims to be the only company which has a large range of internal and external battery UPS system that can cater to customer requirements of up to 30 kVA.

Emerson offers line interactive systems up to 1000 VA which caters up to three work stations and a printer. “Beyond 1 kVA we have online double conversion models, and for 1000 VA to 20000 VA we offer 3 Ph I/P, 1 Ph o/P systems. Beyond this we offer 3 Ph/3 Ph systems,” says Rao.

APC offers solutions right from small office to large data centres. “Our back-UPS range is tailor made for SOHO and SMB segments, while our ‘Smart-UPS’ solutions are focused on SME and mid level enterprises. We also offer solutions for large data centres including racks, PDU’s and cooling systems,” states Burman.

Delta has UPS models catering to specific applications and requirements of the SMB sector. For example, for rating of 1, 2 and 3 kVA, which are widely used by SMB, Delta offers three different product lines—E-Series, N-Series and R-Series. “E-Series UPS are offered for extended backup time up to 24 hours. N-Series is available with inbuilt batteries for backup of 15-20 minutes, which can be further extended. R-Series is for use in standard 19 inch racks for powering servers and network equipment. These are smart systems for mission critical applications, designed for long backup time, easy to start and implement,” informs Sharma.

Green solutions demanded

With a large number of good UPS in the market, consumers have options aplenty. They are now more aware and demand cost effective and green solutions. The competition is fierce amongst the vendors. Emerson has launched various new technologies with energy saving functions like energy optimiser and intelligent paralleling. The energy optimiser works on a multi-module UPS system. This function measures the load and monitors the UPS capacity. Depending on the threshold points set, redundant UPS will be switched off/on as load varies, ensuring UPS are always loaded at their maximum efficiency range. “In 1+N system, if the load is less than the connected modules, one or more module would be idled. But intelligent paralleling function improves efficiency without compromising on the availability load profiling. It monitors the off peak times of modules and adaptively schedule modules to be offline to distribute the operating hours to all modules,” explains Rao.

APC offers green technology based on power saving features that can power down the loads in a situation of ‘no activity’ for some time. Delta’s E-Series has high AC to AC efficiency resulting in lower running cost, quieter operation and lesser load. “It is a truly green UPS, with widest input voltage range to help users to maximise the mains utilisation, thus saving on battery life and replacement costs. These UPS operate on mains mode at voltages as low as 80 V. It has input power factor correction up to unity to reduce input current resulting in lower electricity bills and minimising harmonics,” states Burman.

Luminous UPS are fast charging with near unity input power factor. Its units also have inbuilt input power factor corrector. upsINVERTER.com UPS—with brand name UTL—have single card facility that minimises circuit loss, mechanical loss, stray loss and improves efficiency of the system. It also saves power. Microtek uses high-grade-low-watt loss silicon steel core in transformers with a watt loss of <4W, “whereas other manufacturers use core with a minimum watt loss of 6W which consumes more power. Our products help to save on watt loss, leading to a saving of Rs 30-70 per month on 600VA to 1500VA units. The higher the capacity the more the savings. Our double sided PCBs with PTH also gives better performance and ensures reliability,” says Jain.

Delta claims to be “future ready” to face any challenges and situations. “We believe in making green power protection for real. All Delta product lines have green features like wide input voltage range, which helps to extend the life of the batteries; high energy efficiency, which results in lower wastage of electrical energy and saving of electricity bills; advance battery management, which extends the life of the battery and reduces its consumption,” points out Sharma.

Cost of installation and maintenance

According to Jain, installation costs of UPS solutions are usually charged extra except in case of online UPS systems ranging from 1 kVA to 30 kVA. Agrees Dua, “Cost of installation and maintenance of UPS varies depending on the rating of the UPS. Also, as UPS doesn’t have any mechanical devices, it requires almost negligible cost to maintain.”

Cost of installation also depends on the location of the site (ground floor, upper floor or basement), location of distribution panels, cable entry, battery location, standards of station, etc. “In sub 10 kVA range, installation costs are negligible. However, in larger UPS systems they play an important role,” informs Rao.

As most entry level UPS are plug and play, mid level ones like smart UPS that needs customisation at the time of installation, cost of installation is charged extra. Most UPS are maintenance free. They come with sealed maintenance free (SMF) batteries which do not need any replacement till the end of their lives. “APC sells replacement battery cartridges that can help customers extend the life of their equipment,” says Burman.

Modular UPS also have low initial investments as the UPS can be scaled if requirement for power increases. “Delta UPS systems are easy to deploy, install, re-deploy in case required, as they have modular architecture. Due to extremely high energy efficiency and achieving overall efficiency in excess of 90 per cent at part loads of 15 per cent only, Delta UPS have very low operating expenses, thereby leading to high savings in energy consumption. Wide input voltage range ensures operation of UPS on mains without discharging the batteries, thereby extending life of batteries and reducing battery replacement cost.”

What the future holds

With technology advancing in a fast pace, customers are demanding UPS solutions with advanced technology. Brands are also on their toes to upgrade their products. UPS with two new technologies are in use—hybrid topology and fuel cell based UPS systems. Explains Burman, “Quite evidently, online technology is not an efficient one while line interactive is not the best mode as it lacks the capability to take care of small fluctuations. A hybrid technology is now being evolved. In this system, the UPS remains in standby mode till the voltage fluctuations are in acceptable preset limits and comes online when needed making it more efficient. Fuel cell based UPS systems are also being developed by some high end research organisations which will use hydrogen as fuel to offer longer backup times. However, it is yet to be declared as a commercial technology.”

According to Sharma, “Scalable and modular UPS will be more popular in future as it reduces the initial investment for the customer. Rack based UPS solutions are a necessity in most IT environment to minimise the space requirement.”

BUYING TIPS

Key points which buyers should consider while selecting a UPS system:-

• Check the criticality level and backup requirements. This will help to know if the requirement is for a stand alone, hot-swappable or power paralleling configuration

• Check the criticality level to determine if you need independent battery backups

• UPS should take less space

• It should be easy to install and implement

• UPS should have remote management capability and can be remotely controlled through PC

• Module and system level redundancy guarantees very high reliability and availability- indispensable for any mission critical application. Scalable and modular UPS with energy efficiency and lower cost of ownership will reduce both capital and operation expenses.

• Check for power density

• It should have high input and output parameters

• Reliability and adaptability of the system is important

• Check for scalable, modular and adaptable systems.

Consumers in for user friendly units…

…vendors are, therefore, in a competition to offer innovative features that make the systems user friendly.

  • APC UPS are sold with ‘power chute’—a software that can interactively let a user know the power levels, voltage fluctuations, etc
  • UTL units come with customer configurable USB port; single switch operation and LCD display
  • Delta UPS has LCD display to display information and check the status; NMS to see power utilisation; and remote monitoring support
  • Emerson systems come with intuitive HMI (human machine interface), which display parameters, allow users to change/set parameters, display alarms, etc. It has introduced ‘black box’ function similar to that found in aircrafts. This functionality ensures storing in the memory snapshots preceding a fault of parameters in 10 minutes interval, within the last 1.5 work cycle. All records can be exported in text format
Electronics Bazaar, South Asia’s No.1 Electronics B2B magazine
- Advertisement -

Related Artcles

LEAVE A REPLY

Please enter your comment!
Please enter your name here
Captcha verification failed!
CAPTCHA user score failed. Please contact us!

Exclusive

India, China Grow Amid First Global Cellular IoT Module Shipments Annual Decline

0
Several companies started local manufacturing in India. 4G Cat 1 bis emerged as the fastest-growing segment. Around 12% of the modules shipped in...

“More Chargers Provide Security And Confidence To Customers, Encouraging EV Adoption”

0
With an agenda to transform the EV industry, EarthtronEV has established 250+ charging stations on major highways across India. The company aims to interconnect...

5G RedCap To Transform IoT Module Shipments

0
Over 60% of IoT module shipments will originate from the Asian & Oceania region. Automotive sector is expected to be a significant driver. The...

Buzz

TSMC

SmartSoC To Provide Chip Design Services Through TSMC’s Design Alliance

0
SmartSoC solutions will provide chip design services and system-level solutions, making it easier for customers to adopt TSMC's technology. Chip design services provider SmartSoC Solutions...

Montra Electric Boosts Amritsar’s Green Mobility with RAAHI Project

0
The initiative is a component of the City Investments to Innovate, Integrate, and Sustain (CITIIS) program, which falls under the auspices of the Ministry...

BYD Delays Vietnam EV Factory Plans

0
Vietnam's government announced in May that BYD plans to construct a facility for manufacturing and assembling electric cars in Phu Tho, a northern Vietnamese...

Important Sectors

TSMC

SmartSoC To Provide Chip Design Services Through TSMC’s Design Alliance

0
SmartSoC solutions will provide chip design services and system-level solutions, making it easier for customers to adopt TSMC's technology. Chip design services provider SmartSoC Solutions...

India, China Grow Amid First Global Cellular IoT Module Shipments Annual Decline

0
Several companies started local manufacturing in India. 4G Cat 1 bis emerged as the fastest-growing segment. Around 12% of the modules shipped in...

Montra Electric Boosts Amritsar’s Green Mobility with RAAHI Project

0
The initiative is a component of the City Investments to Innovate, Integrate, and Sustain (CITIIS) program, which falls under the auspices of the Ministry...

BYD Delays Vietnam EV Factory Plans

0
Vietnam's government announced in May that BYD plans to construct a facility for manufacturing and assembling electric cars in Phu Tho, a northern Vietnamese...
Keysight Technologies Pvt Ltd Logo

Keysight Acquires Spirent Communications For $1.46 billion, Outbids Rival Viavi Solutions

0
Keysight's offers 85.9% premium over Spirent's closing price on March 4, exceeding Viavi's 61.4% premium. Keysight expects new serviceable available market opportunities of...

Manufacturing

BYD Delays Vietnam EV Factory Plans

0
Vietnam's government announced in May that BYD plans to construct a facility for manufacturing and assembling electric cars in Phu Tho, a northern Vietnamese...

JLR To Hire 250 Electrical Technicians For Future EVs

0
These new roles, part of a £15 billion investment, are in addition to 300 positions created last year by the British car maker. Jaguar Land...

Altmin India Partners With WMG To Advance Battery Tech

0
Altmin and WMG will collaborate to strengthen their global battery materials supply chain position by optimizing cathode materials and developing diverse cell designs across...

EVs To Cost Less Than Gas Vehicles by 2027, Says Gartner

0
Gartner predicts a faster decline in production costs compared to battery costs, which represent the most significant expense in an electric vehicle, accounting for...
MG

MG Motor To Set Up Battery Assembly Unit At Halol Facility

0
The company plans to investigate battery cell production in collaboration with external partners. Automaker MG Motor India is actively exploring the possibility of assembling and...