Advances in LED components to drive growth in the LED industry

- Advertisement -
- Advertisement -

Rapid advances in the electronic components domain are expected to boost the growth of the LED industry in India. These developments have helped to expand LED functionality. Yet the future of this industry depends on further improvements, investments in infrastructure and continuous R&D to increase production capacity and affordability.

By Priyanka Kumari

LED lighting has evolved over the years as innovative new components are used for wider application. It almost seems like for every lighting need, there is now an LED solution. The LEDs’ energy-saving properties, as well as their ability to change colour and temperature, have led to a better lighting experience with smart lighting solutions, healthy lighting options and the capabilities to illuminate small spaces.

- Advertisement -

Key LED components
The various components that make up LEDs and the technology used in making these components are key to better product designs, which will result in the increased application of LEDs. Let us take a close look at these components.

1. Epoxy lenses: While protecting the LED semiconductor from outside elements, epoxy lenses are designed to allow light to escape in a way that the view angle can be focused or controlled. There are no loose or moving parts within the solid epoxy enclosure. Some guiding factors are the shape of the lens and reflector cup, the size and distance of the lens from the LED, etc. A wider viewing angle is achieved by positioning the LED closer to the nose of the lens. There are four main types of epoxy lenses that are commonly used.

  • Clear lenses: These produce the highest light output and the narrowest viewing angle. They are used for applications that require high intensity.
  • Tinted lenses: These are used to indicate the LED’s colour when switched on.
  • Non-diffused lenses: These are commonly used in backlighting applications in which the LED is focused on a translucent window in front of a panel. Such lenses with no glass particles produce a viewing angle of +/-12 degrees from the centre.
  • Diffused lenses: Generally used in the front panel of electronic equipment, these lenses have tiny glass particles embedded in them and spread light in a viewing angle of +/-35 degrees from the centre.

2. Wire bond: This is an interconnection between the anode (positive) and cathode (negative).

3. Reflective cavity: It brightens the light of the LED by focusing it onto a single point.

4. Anvil and post: These are the two leads in the LED used to supply input voltage and are connected with the chip or semiconductor die by a wire bond. Used for heat sinking, the anvil is smaller, is the negative lead and has a cavity to hold the die. The bigger and positive lead is known as the post.

5. Semiconductor die: The rectangular shaped die is the most expensive component due to the high-precision manufacturing and handling processes involved. Semiconductor materials like gallium arsenide (GaAs), gallium phosphide (GaP), or gallium arsenide phosphide (GaAsP) are crystallised from the gaseous state, by the process of metal-organic chemical vapour deposition. The functional circuit is fabricated from two semiconductor materials called N type and P type and an active region called the P-N junction, which is between them. When current is passed through the LED, free electrons from the N layer move to the P layer in the P-N junction. Gold wires are welded on the negative and positive terminals.

The latest technology in LED components
Most lighting designers dream of concealing the luminaire so that the user notices only the light and not its source. Towards achieving this goal, let’s now move on to a discussion on material technologies used in LED manufacturing.

1. Materials: The latest trend in LED lighting is towards smaller, thinner, more integrated systems that provide optimised performance but are practically invisible. Various compounds, such as silicon, sapphire, polycarbonate and gallium nitride are being experimented with but no single one has emerged as a leader. The same can be said of the many materials in an LED fixture, from the optics to the LEDs themselves. Some of the latest materials that the industry uses are:

  • Remote phosphor: One of the biggest innovations in recent times is in remote phosphor technology, which separates the phosphor from the diode. Phosphor is integrated with the diffuser optic to increase design freedom and decrease manufacturing costs. It can boost efficacy by as much as 30 per cent because it effectively captures an LED’s spill light, extracting more lumens per blue LED than traditional designs. It beams light in 360 degrees when stimulated and efficiently recycles the light for maximum efficiency. Remote phosphor offers a new way to control colour, since hue and temperature now can be manipulated without altering the LED architecture. The search for new phosphor materials has led to narrow-band red phosphor, which provides better access to certain portions of the light spectrum for greater efficiency.
  • Mouldable silicone: In recent years, there has been a revolution in the materials used in LED optics. New LED configurations such as chip-on-board (COB) designs have provided higher and more consistent temperatures. Though glass is known for its superior thermal and optical performance, demand for thinner materials and smaller sources has made it less desirable. Alternatives like polycarbonate (a type of thermoplastic polymer) and polymethyl methacrylate (PMMA) also have limitations when it comes to manufacturing smaller LEDs. Mouldable silicone combines the properties of plastics and glass. It can withstand high temperatures, high levels of ultraviolet light exposure, and high lumen densities. Its stability with different wall thicknesses is perhaps its greatest advantage over polycarbonate, allowing for greater design flexibility.
  • Gallium Nitride (GaN) substrates: The diode itself has evolved considerably in the recent past. First-generation LEDs used some combination of GaN and a substrate made of glass, silicon, silicon carbide and sapphire. Several companies have experimented with making the substrate out of GaN as well. Using the same material for both layers creates a much more reliable diode, even when running at high power densities. However, the high cost of GaN has been a major hurdle.

2. Manufacturing process: LED products are assembled either manually or using automated methods. In the case of hand assembly, skilled technicians carefully place individual LED components onto circuit boards using specialised tooling, making it a long and tedious process that results in a low production rate. In automated assembly lines, surface mount technology (SMT) equipment is used to quickly and efficiently place multiple LED components on the circuit board, all at one time, increasing the production rate and decreasing labour costs.

Benefits of innovative technology
The benefits of LED lighting are a result of the technology that goes into making the LED components. Some important aspects are:

LED light colour and colour temperature: Most LED fixtures produce white colour light, which is classified into several categories based on warmth or coolness, or based on colour temperature—warm, neutral, pure, day and cool white—ranging from 2700 Kelvins to 7500 Kelvins.

As the colour temperature rises, light becomes whiter until it reaches the day white colour, which is similar to natural light (daytime light from the sun). LEDs do not produce white light but this effect is achieved by mixing red, green and blue. Colour mixing involves combining different light wavelengths of two or more diodes, and it is possible to achieve any of the seven colours that are found in the visible light spectrum (the rainbow colours), which produce a white colour when they are all combined.

Energy efficiency: LEDs are energy efficient because they convert nearly all of the input power (95 per cent) into light energy. Additionally, they do not emit infrared radiation or invisible light. This is managed by mixing the colour wavelengths of the diodes in each fixture to achieve only the white colour wavelength.

Luminous flux: The light produced by LEDs is measured in luminous flux, which is defined as the amount of energy emitted by a light source in all directions. The reason for changing the basis of measuring LEDs from wattage to brightness is because LEDs are low power devices. It makes more sense to determine brightness using the luminous output instead of the power output. Different LED fixtures have different luminous efficacy (the ability to convert electrical current into light output). Therefore, fixtures that consume the same amount of power might have a different luminous output.

LEDs and heat: LED fixtures are cool to touch because only a small portion of energy is converted to heat energy when current is passed through them. Also, LED fixtures come with heat-sinks, which prevent overheating.

The life of LED fixtures: Many LED light fixtures can last between 50,000 and 70,000 hours, which is about five times longer than incandescent and fluorescent fixtures. In the case of the latter two, electrical filaments burn out after a short period and the glass casing (used to house the plasma or gas) is susceptible to damage. LEDs do not burn out unless the diodes get overheated. The luminous flux of an LED fixture degrades gradually when it reaches 70 per cent of the original luminous output (referred as L70). This can be noticed by the human eye and further degradation makes continued usage of the fixture impractical.

What those in the industry say about the latest technology used to manufacture LED components
Vijay Kumar Gupta K., CEO, LEDchip Indus Pvt Ltd
LED chips are progressing in two major directions—increased efficiency and improved packaging for the performance of micro LED displays. Lateral LED chips of smaller sizes are proving competitive and provide higher efficacy than high power chips.No country will have a healthy industry without the components being produced locally and hence improvements should happen at the components level, which could be passed on to the product developers with IP rights for a winning edge. With LED packaging within the country itself, India can save significant amounts of foreign exchange as currently over two billion LEDs are imported every month, and this figure is growing at a CAGR of 25 per cent. Many Indian users of SMD LEDs are keen to use locally made LEDs and support the industry, despite dumping offers from overseas.Dr Kushant Uppal, founder and managing director, Intelizon Energy Pvt Ltd
High power LEDs with high lumen per watt and advanced lenses for best in class lux are ideal for outdoor lights. LED components producing the right optics can lead to best-in-class lighting with the lowest power consumption. This can be of great value when used in the solar and battery domains.Shyam Sunder Jindal, managing director, Olive Exports Pvt Ltd
Existing technologies are being improved across various parameters including design, ruggedness of the electronics, better heat sinking, use of LEDs with the maximum possible lumen output, and performance as per Indian climatic and power supply conditions.
LED components are important for saving energy as India is a vast country and lighting consumes a huge amount of energy. A focus on increased industrial productivity would help in the growth of the LED industry.

Future predictions
India’s LED market is forecast to reach US$ 1.46 billion by 2019 at a CAGR of 35.9 per cent over the period of 2014-19. Future growth lies in technological improvements and investments in infrastructure to increase productivity and affordability. To encourage broader adoption, industry standards must be developed to cover LED components, modules and systems. Quick and advanced testing should be performed to better understand the performance and degradation of LEDs to help the manufacturers improve on system designs.
As LED manufacturers focus on the quality of light output, they need to work on the right balance between colour rendering, efficacy and systems optimisation. New applications are expected to be developed based on the performance and design characteristics as opposed to making LEDs fit into existing fixtures and applications. Components need to be designed such that there is a further reduction in energy consumption, and better colour consistency for various lighting solutions.

- Advertisement -

Related Artcles

LEAVE A REPLY

Please enter your comment!
Please enter your name here
Captcha verification failed!
CAPTCHA user score failed. Please contact us!

Exclusive

“Our Goal is to Offer 1000 To 1500 Varieties, With Volumes Ranging From 10000...

0
During a chat with Nitisha Dubey from EFY, Mohammed Iqbal, CEO of Technomake Electronics Pvt Ltd, talks about PCB assembly and major customer focus...

India, China Grow Amid First Global Cellular IoT Module Shipments Annual Decline

0
Several companies started local manufacturing in India. 4G Cat 1 bis emerged as the fastest-growing segment. Around 12% of the modules shipped in...

“More Chargers Provide Security And Confidence To Customers, Encouraging EV Adoption”

0
With an agenda to transform the EV industry, EarthtronEV has established 250+ charging stations on major highways across India. The company aims to interconnect...

Buzz

TSMC

SmartSoC To Provide Chip Design Services Through TSMC’s Design Alliance

0
SmartSoC solutions will provide chip design services and system-level solutions, making it easier for customers to adopt TSMC's technology. Chip design services provider SmartSoC Solutions...

Montra Electric Boosts Amritsar’s Green Mobility with RAAHI Project

0
The initiative is a component of the City Investments to Innovate, Integrate, and Sustain (CITIIS) program, which falls under the auspices of the Ministry...

BYD Delays Vietnam EV Factory Plans

0
Vietnam's government announced in May that BYD plans to construct a facility for manufacturing and assembling electric cars in Phu Tho, a northern Vietnamese...

Important Sectors

Microchip Technology Expands TrustFLEX Family With CEC1736 Real-Time Platform Root Of Trust Devices

0
TrustFLEX devices along with the Trust Platform Design Suite tool will simplify the enablement of root of trust from concept to production in wide...
TSMC

SmartSoC To Provide Chip Design Services Through TSMC’s Design Alliance

0
SmartSoC solutions will provide chip design services and system-level solutions, making it easier for customers to adopt TSMC's technology. Chip design services provider SmartSoC Solutions...

India, China Grow Amid First Global Cellular IoT Module Shipments Annual Decline

0
Several companies started local manufacturing in India. 4G Cat 1 bis emerged as the fastest-growing segment. Around 12% of the modules shipped in...

Montra Electric Boosts Amritsar’s Green Mobility with RAAHI Project

0
The initiative is a component of the City Investments to Innovate, Integrate, and Sustain (CITIIS) program, which falls under the auspices of the Ministry...

BYD Delays Vietnam EV Factory Plans

0
Vietnam's government announced in May that BYD plans to construct a facility for manufacturing and assembling electric cars in Phu Tho, a northern Vietnamese...

Manufacturing

BYD Delays Vietnam EV Factory Plans

0
Vietnam's government announced in May that BYD plans to construct a facility for manufacturing and assembling electric cars in Phu Tho, a northern Vietnamese...

JLR To Hire 250 Electrical Technicians For Future EVs

0
These new roles, part of a £15 billion investment, are in addition to 300 positions created last year by the British car maker. Jaguar Land...

Altmin India Partners With WMG To Advance Battery Tech

0
Altmin and WMG will collaborate to strengthen their global battery materials supply chain position by optimizing cathode materials and developing diverse cell designs across...

EVs To Cost Less Than Gas Vehicles by 2027, Says Gartner

0
Gartner predicts a faster decline in production costs compared to battery costs, which represent the most significant expense in an electric vehicle, accounting for...
MG

MG Motor To Set Up Battery Assembly Unit At Halol Facility

0
The company plans to investigate battery cell production in collaboration with external partners. Automaker MG Motor India is actively exploring the possibility of assembling and...