Function generators are moving towards a higher bandwidth and dynamic range

- Advertisement -
- Advertisement -

Players are focusing on developing devices with high capabilities, yet at a lower cost

By Richa Chakravarty

Tuesday, March 11, 2014: Function generators, variously known as signal generators, arbitrary waveform generators (AWGs) or digital pattern generators, are devices that produce simple repetitive waveforms. They are used to generate different types of electrical waveforms over a wide range of frequencies. Generally used in designing, testing, troubleshooting and repairing electronics, function generators can typically provide frequencies up to 20 MHz. Despite the fact that function generators cover both audio and RF frequencies, they are usually not suitable for applications that need low distortion or stable frequency signals.

- Advertisement -

Function generators like AWGs, radio frequency (RF) and microwave signal generators, vector signal generators, etc, serve different purposes and applications like defence, aerospace and telecommunications. Globally, the wireless telecom industry has greatly influenced the growth and expansion of the function generators industry in recent years. Manufacturers are currently focusing on developing devices with high capabilities and are making them available to customers at a cost.

What’s new in the market

The emergence of digital modulation technology and wireless technologies like wireless interoperability for microwave access (WiMAX), wideband code division multiple access (WCDMA), global system for mobile communication (GSM) and 3G wireless are driving the growth of AWGs, RF and microwave function generators. On the technological front, these generators are moving towards a higher bandwidth and dynamic range.

High speed DACs: The technical trends driving the industry in the arbitrary segment are the high speed digital-to-analogue converters (DACs) providing up to 16-bit resolution at sample rates in excess of 1 GSa/s. AWGs that are used for high-end design and test applications allow users to specify a source waveform in a variety of ways. These devices provide the foundation for an AWG with the bandwidth and dynamic range to address modern radio and communication applications. Agilent’s M8190A is a high performance, high bandwidth AWG. With Agilent’s proprietary DAC technology, the product has a 14-bit DAC and a sampling rate of 8 GSa/s or a 12-bit DAC at a sampling rate of 12 GSa/s. “The M8190A is a compact box available with an advanced telecommunication architecture extension for instrumentation (AXIe) platform, which makes it scalable. It offers the best spurious dynamic range currently available in the market with a resolution of 14 bits,” says Mahesh Subramanyam, applications engineer, electronic measurement group, Agilent Technologies India Pvt Ltd.

Modular designs to serve specific purposes: Keeping pace with the evolving technology, players are offering modular designs, providing options required for a specific application. Any configuration is possible with these modular designs. Rohde & Schwarz’s SMW200A function vector generator can be configured from a classic single path vector function generator to a multi-channel MIMO receiver tester. The generator can be equipped with a maximum of two internal baseband modules and four fading simulator modules. It is also possible to install a second 3 GHz or 6 GHz RF path. “The capabilities of R&S’ SMW200A surpass those of two conventional generators combined. When the instrument is fully equipped, the baseband section provides up to eight independent signal sources and up to 16 logical faders. This makes the SMW200A ideal for MIMO and other complex applications encountered in LTE Advanced, HSPA (dual carrier) and multi-standard radio,” shares Vinay Balusa, assistant manager, business development, Rohde & Schwarz India Pvt Ltd. The SMW200A offers exceptional compactness and uses the latest FPGA technology so that up to four of the powerful fading modules can be installed. These modules can simultaneously emulate as many as 16 fading channels. The maximum fading bandwidth is 160 Mhz.

One device for multiple purposes: For various multi-function receivers, such as mobile phones and car navigation systems, it is necessary to evaluate interference from other built-in systems. In this case, since the frequency bands are different, it is better to have a product line that can be selected freely. Anritsu’s MG3710A vector function generator offers dual RF and dual waveform options that enable a single MG3710A to give an output of up to four independently modulated signals. It offers a high-function, function generator with excellent RF and baseband performance. “The MG3710A features wideband vector modulation and offers built-in baseband waveform generation with deep memory to ensure maximum versatility. It supports key mobile communications and wireless LAN standards, and it also has the exceptional performance required for emerging and proprietary wireless communications technologies,” informs Madhukar Tripathi, regional manager, Anritsu Pte Ltd, India.

High performance and signal fidelity: Along with a modular structure, manufacturers are currently focusing on expanding the bandwidth and frequency range of function generators. Lecroy has recently expanded its popular WaveStation series of function/arbitrary waveform generators to include three new models with a bandwidth of up to 160 MHz and a 500 MS/s sample rate—over three times more bandwidth and four times more sample rate than the existing models. Informs Prabhanjana Rao, regional sales manager, India, SE Asia and ANZ, Lecroy India, “WaveStation 3000 models are available with bandwidths of 80 MHz, 120 MHz and 160 MHz, each with a 500 MS/s sampling rate, a 14-bit resolution and 16 kpts memory per channel. All WaveStation products come with two channels as standard. They also have an extensive waveform library, and various connectivity and synchronisation capabilities. In addition, the high sample rate and high resolution with low jitter and low harmonic distortion ensure the superior precision of the generated waveform.”

testandmeasurement_speakersCompact sized devices: Function generators are not only getting compact in size, offering better aesthetics and improved portability but are loaded with state-of-the-art features. GW Instek’s USB compatible RF function generator with the frequency range from 35 MHz to 4400 MHz is a pocket-sized function generator. It can be powered with and operated through USB interface with PC, smartphone or a tablet. Available in five models to meet users’ requirements, the USG-series provides continuous wave (CW) signal outputs without any signal modulation function. “The USG series has several operational modes including fixed frequency, frequency sweep, frequency hopping and power sweep. The USG series RF function generator, with the frequency bandwidth limitation, provides lower harmonic output performance,” says Sumit Sharma, marketing manager, Good Will Instrument Co Ltd.

Taking a purchase decision

Before buying a function or signal generator, it is important to know the application it is required for — whether the generator is being used for a low, medium or high-end device. It is equally important to know the maximum frequency that needs to be generated, the bandwidth required, sampling rate of the generator, maximum and minimum power levels used for testing, etc.

Along with the basic requirements, it is equally important for the user to know the software platforms that the instrument supports, along with the purity with which the signal needs to be generated. Also, the playback time that is required needs to be checked, which, in turn, will decide the memory requirements of the generator,” suggests Mahesh Subramanyam.

 Rohde & Schwarz’s SMW200A signal vector generator

  • rhodeandschwarzOne or two RF paths with a frequency range from 100 kHz to 3 GHz or 6 GHz

  • Up to 160 MHz I/Q modulation bandwidth (in RF) with internal baseband

  • Options for all important digital communications standards

  • Optional integrated fading simulator with up to 160 MHz bandwidth

  • Support for all key MIMO modes including 3×3, 4×4 and 8×2

 

 Agilent’s M8190A AWG

  • agilent5 GHz analogue bandwidth and signals up to 5–7 GHz frequency

  • Up to 80 dBc SFDR, 14-bit vertical resolution

  • 2 GSa memory for long playtime

  • Digital up-conversion for best IF signal quality and longer lasting playtime

  • Best memory usage through sequencing

 

 

Anritsu’s MG3740A vector signal generator 

  • anritsuFrequencies of 100 kHz to 2.7/4/6 GHz

  • ACLR: -71 dBc (W-CDMA Test-Model 1 64DPCH, ≤+5 dBm)

  • Output level +23 dBm (CW, 400 MHz to 3 GHz)

  • Switching time: <600 µs (List mode)

  • Dual RF (optional) provides two independent RF outputs

  • Dual waveform memory (optional) enables two independently modulated signals per RF output

 

 

 GW Instek’s USG-series RF signal generator

 

  • instekFrequency range from 35MHz to 4.4GHz

  • Excellent performance in pocket size, is a valuable and economical choice

  • Spectral purity of 107dBc/Hz, dwell time of 1ms, frequency offset setting of ±50kHz, and frequency resolution of 10kHz

  • Offers PC application software compatible with Windows 2000/XP/Vista/7/8, Linux, Android and Mac OS X through a USB interface

  • The USG APP is available on Google play store to download to smart phone or tablet with Android 4.0 or above

 

 Owon’s AG 1022F arbitrary signal generator offered by MetroQ

  • owonAdvanced DDS technology, 25 MHz frequency output

  • 125 MSa/s sample rate, and 32 bits frequency resolution

  • Vertical resolution: 14 bits, 8K arbitrary waveform length

  • Comprehensive waveform output: 5 basic waveforms and 26 built-in arbitrary waveforms

  • Comprehensive modulation functions: AM, FM, PM, FSK, PWM, sweep and burst

 

 

 Parameters to look for before buying a function/signal generator

 

  • Frequency range

  • Bandwidth

  • RF modulations

  • Phase noise performance

  • High power output

  • High speed switching <600 μs

  • Level of accuracy

  • Linearity

  • Waveform combine function

  • In-built function

  • Optional items

  • Future upgrade options

Electronics Bazaar, South Asia’s No.1 Electronics B2B magazine

- Advertisement -

Related Artcles

Exclusive

“More Chargers Provide Security And Confidence To Customers, Encouraging EV Adoption”

0
With an agenda to transform the EV industry, EarthtronEV has established 250+ charging stations on major highways across India. The company aims to interconnect...

5G RedCap To Transform IoT Module Shipments

0
Over 60% of IoT module shipments will originate from the Asian & Oceania region. Automotive sector is expected to be a significant driver. The...
XR Headset Quest 3, Meta

Global XR Headset Shipments See A Major Decline, Sony Rises

0
Sony grabbed a market share of 24% in 2023 up from 1% in 2022. Bulky form factor, and lag, hinder adoption by serious...

Buzz

Tenstorrent- RISC V cores

MosChip Collaborates With Tenstorrent For Advanced RISC-V Cores

0
Tenstorrent has selected Moschip due to their tape out expertise in design services. India’s MosChip Technologies has announced partnership with computing company Tenstorrent and to...

BYD Aims For 20% Increase In Yearly EV Sales

0
The company is targeting sales of 500,000 vehicles internationally this year, over twice the amount sold last year, and aims to increase that figure...

RRP Electronics To Invest ₹5000 Cr In OSAT and R&D In Maharashtra

0
Cricket legend Sachin Tendulkar is investing in this semiconductor facility. Such celebrated personalities investing in the sector could be a great asset to the...

Important Sectors

“More Chargers Provide Security And Confidence To Customers, Encouraging EV Adoption”

0
With an agenda to transform the EV industry, EarthtronEV has established 250+ charging stations on major highways across India. The company aims to interconnect...

BYD Aims For 20% Increase In Yearly EV Sales

0
The company is targeting sales of 500,000 vehicles internationally this year, over twice the amount sold last year, and aims to increase that figure...

RRP Electronics To Invest ₹5000 Cr In OSAT and R&D In Maharashtra

0
Cricket legend Sachin Tendulkar is investing in this semiconductor facility. Such celebrated personalities investing in the sector could be a great asset to the...

Subsidy Cuts Push E2W Makers Towards Budget Models

0
Electric two-wheeler manufacturers face reduced government subsidies and growing competition from established petrol vehicle brands in the upcoming fiscal year. These challenges compel them...

Nissan To Invest In Renault’s Ampere For EV Roadmap

0
The alliance aims to introduce both five-seater and seven-seater models for each brand in India. Japan's Nissan Motor has committed to investing in Renault's electric...

Manufacturing

JLR To Hire 250 Electrical Technicians For Future EVs

0
These new roles, part of a £15 billion investment, are in addition to 300 positions created last year by the British car maker. Jaguar Land...

Altmin India Partners With WMG To Advance Battery Tech

0
Altmin and WMG will collaborate to strengthen their global battery materials supply chain position by optimizing cathode materials and developing diverse cell designs across...

EVs To Cost Less Than Gas Vehicles by 2027, Says Gartner

0
Gartner predicts a faster decline in production costs compared to battery costs, which represent the most significant expense in an electric vehicle, accounting for...
MG

MG Motor To Set Up Battery Assembly Unit At Halol Facility

0
The company plans to investigate battery cell production in collaboration with external partners. Automaker MG Motor India is actively exploring the possibility of assembling and...

Servotech Boosts India’s EV Charging Infrastructure With Manufacturing Facility

0
The new facility is poised to start with an annual production capacity of 24,000 power modules and plan to scale up to 2.4 lakh...